Installation

Mounting varies by design. Follow the mounting method and hardware information on your product listing and selected option. A general installation method described here does not add a mounting option to a product.

Standoff-mounted signs

Use the supplied layout or installation guide to position the sign level and mark mounting locations before drilling. Confirm the wall construction and use anchors or fasteners appropriate for the mounting surface.

Adhesive-mounted designs

This guidance applies only to designs identified for adhesive mounting and a suitable installation surface. Adhesive is not automatically included; the product listing governs what is supplied. The 265 without-standoffs option is smooth and undrilled, with no holes, hardware, or adhesive included. For an installation not specified on your listing, contact VEE-R Studio before ordering.

For adhesive mounting specified for your design, follow the adhesive manufacturer’s instructions for material compatibility, surface preparation, exterior exposure, temperature and curing. If the chosen adhesive has a removable liner, check placement before removing it. Do not assume every surface or exterior location is suitable.

Before installation

Confirm spacing, level, visibility from the street, and clearance around doors, trim, siding joints, masonry edges, and electrical fixtures. If you are unsure about drilling into your exterior, use a qualified installer.